Mixer and Granulator - Medical Machinery

Mixer and Granulator

Mixer and Granulator - Medical Machinery
Working Principle
The powder raw materials and adhesives in a cylinder container are fully mixed into humid at the bottom. Then it is cut into uniform granules by the high-speed crusher at the side.
Features
1 The machine adopts horizontal cylinder structure. Its structure is reasonable;
2 Using air-filling seal shaft to drive. When washed, it can be changed to water;
3 Ball-type granules, good fluidness;
4 Compared the traditional process, 25% of adhesive can be reduced and the drying time can be shorted;
5 The time of mixing in drying is 2-minutes each time, and the time of granulating is 1-4 minutes. Compared with the traditional process, efficiency rises 4-5 times;
6 In the same sealed container, the processing: dry-mixing and humidity-mixing and granulating can be finished. It’s conformity with the requirements of GMP;
7 The whole operation has strict safety and protective measures.
Technique parameters:

Item Type
Name Unit 10 50 150 200
Volume L 10 50 150 200
Capacity Kg/batch 3 15 50 80
Mixing speed r/m 300 /600 200/400 180/270 180/270
Mixing power KW 1.5/2.2 4/5.5 6.5/8 9/11
Cutting speed rpm 1500/3000 1500/3000 1500/3000 1500/3000
Cutting power KW 0.85/1.1 1.3/1.8 2.4/3 4.5/5.5

Item Type
Name Unit 250 300 400 600
Volume L 250 300 400 600
Capacity Kg/batch 100 130 200 280
Mixing speed r/m 180/270 140/220 106/155 80/120
Mixing power KW 9/11 13/16 18.5/22 22/30
Cutting speed rpm 1500/3000 1500/3000 1500/3000 1500/3000
Cutting power KW 4.5/5.5 4.5/5.5 6.5/8 9/