Hot Air Circulation Oven

Hot Air Circulation Oven

Hot Air Circulation Oven

Principle of RXH Hot Air Circulation Oven
The RXH hot air circulation oven's air circulation system adopts the blower recycling wind pattern which is highly efficient. The wind source, sent out by recycling wind motors (contactless switch), activates the wind wheel after passing the heater, and then sends out hot wind. Afterwards, it reaches the inner chamber of hot air circulation oven through the whirl tube and then absorbs the used air into the whirl tube as the recycled wind source, waiting to be used again and ensure the even chamber temperature. When the switch's movement causes the temperature fluctuation, the wind recycling system will quickly restore its operational state until the temperature arrives at the set one.

Application of RXH Hot Air Circulation Oven
Our RXH hot air circulation oven is used for baking chemical gases or the foods waiting to be baked, solidifying printing ink, and drying the paint film. It is widely used for precise baking, drying, tempering, warming-up, finalizing the design and processing in the industries like electronics, electrical motors, telecommunications, plating, plastics, metals and chemicals, equipment, printing, pharmacy, PC board, powder, spray finishing, glass and timber building materials. The materials being baked are heated evenly thanks to the inner heat recycling.
Structure of RXH Hot Air Circulation Oven:
RXH hot air circulation oven is made of angle iron, stainless plate and cold steel. The insulating course is filled with high-density aluminum silicate cotton which can ensure the insulation of the oven and the safety of its user. The heater can be installed at the bottom, the top or on the two sides. The temperature is controlled by digital display intelligent meter. RXH hot air circulation oven's whirl tube can send wind both vertically and horizontally.

Features of RXH Hot Air Circulation Oven
1. The hot wind is recycled inside the oven, a high thermal efficiency, and energy conservative.
2. Use forced draft ventilation, a whirl tube within the oven, the substance dry and even.
3. Our hot air circulation oven runs stably. It has automatically controlled temperature. It is easy to maintain.

Technique Parameter

Model RXH-5-C RXH-14-C RXH-27-C
Old type CT-0 CT-C-I CT-C-II
Dry Qty(KG) 25 100 200
Power (KW) 0.45 0.45 0.9
Steam consumption(kg/h) 5 18 36
Wind power(cubic meters/h) 3400 3400 6900
Temperature difference(degree) ±2°C ±2°C ±2°C
Plate(pieces) 24 48 96
Overall size(mm) 1550×1000×2290 2300×1200×2300 2300×2200×2300
Type A truck of single door Two trucks of two doors Four trucks of two doors
Net weight(kg) 600 1000 1600
Gross weight(kg) 850 1350 1350
Model RXH-41-C RXH-54-C
Old type CT-C-III CT-C-IV
Dry Qty(KG) 300 400
Power (KW) 1.35 1.8
Steam consumption(kg/h) 54 72
Wind power(cubic meters/h) 10350 13800
Temperature difference(degree) ±2°C ±2°C
Plate(pieces) 144 192
Overall size(mm) 2300×3200×2300 4460×2200×2290
Type Six trucks of three doors Eight trucks of four doors
Net weight(kg) 2200 2900
Gross weight(kg) 2750 3700
Company Brief: Shanghai Tianjiu Pharmaceutical Machinery Co., Ltd. is a leading medical machinery manufacturer in China, such as pharmaceutical tablet press, powder mixer, pharmaceutical milling machinery, granulation machine, pharmaceutical packaging machinery and sugar coating machine. Our medical machinery is widely used in pharmacy, chemical, food, electronic and metallurgy industries. We specialize in development of any type of pharmaceutical tablet press, powder mixer, pharmaceutical milling machinery, granulation machine, pharmaceutical packaging machinery and sugar coating machine.